Hydraulic / Actuation Options
Hyrdraulic / Actuation Options
 |
Larger Power Units* Higher horsepower motors and hydraulics used to increase travel speed. |
 |
Minimum Downdrift Valving* Positive shut-off valving for use where platform must maintain position for extended time periods. Positive shut-off valving for use where platform must maintain position for extended time periods. |
 |
Manual Hand or Foot Pump Acutation Lever type hand pump or food pedal pump for use when manual actuation or precise positioning is required. |
 |
Continuous Duty Power Units* Specially designed power units with motors capable of many motor starts per hour. |
 |
Air Motor Driven Power Units For use where electrical actuation is undesirable and shop air is available; meets explosion proof requirements. |
 |
Cross Check Valving* Locks oil in cylinders to eliminate deflection caused by oil transfer. Used in certain side loading applications. |
 |
Continuous Running Power Units* Heavy-duty power units with special cooling features. Power unit run continuously, and valves are actuated to activate lift. Used for extremely high jogs or cycles. |
 |
Screw Jack Lift is actuated by gear motor driven worm or ball screw. For more precise, repetitive positioning or where hydraulics are not desired. |
 |
DC Power Units Direct current power units for use with battery power. |
 |
DC Power Units Full JIC Style* Continuous running power unit built to JIC specifications. |
 |
Double Acting Cyinders* For special applications where it is necessary to provide both power up and power down. |
 |
Hot and Cold Temperature Hydraulic Packaging Special sealing and hydraulic fluids for use in hot or cold atmospheres. |
 |
External Power Unit* Power unit is connected to lift only by hydraulic hoses. |
 |
No Coast Valving* Fast acting hydraulic valving, which decreases upward coast, for use where more precise positioning is desired. |
 |
Air Bag Actuation Inflatable air bag provides limited travel lift actuation. Used where electrical power is not desirable or where only two positions are required. |
 |
Excess Flow Protectors and Velocity Fuse(s)* Hydraulic control prevents table free fall in the unlikely event of massive hydraulic failure. |
| Note: * Because of the high performance of standard tables, most asterisked options may not be required in normal usage. To avoid unnecessary cost, please consult factory before specifying these options. | |